2,3 m Mobile workbench MFW1000-AT / 80 cm deep / 890 - 1.290 mm high / 2 levels / steel decking

Flexible and mobile: the mobile worktable from TOPREGAL

Equipped with 4 swivel castors, this worktable can be easily pushed from A to B, with each swivel castor supporting a point load of 125 kg. As a result, each of our mobile worktables is limited to a bay load of 500 kg. This turns the worktable into a mobile packing station, assembly table or practical industrial workbench. Thanks to the castors, moving small parts and tools is no longer a problem either. Configure your warehouse flexibly with the mobile worktables from TOPREGAL.

Practical and with steel shelves: the workbench from TOPREGAL

This industrial workbench is equipped with 2 steel shelves. Thanks to the galvanised surface, storing liquids and cleaning the 1 mm thick shelf is considerably easier. Thanks to the special design of our stepped beams, the steel shelves secure themselves and are protected against slipping and falling out. These orange-painted beams can be easily inserted individually at height in increments of 50 mm using the plug-in system. The height of the entire table can also be varied by up to 40 cm. This allows you to configure the worktable according to your preferences.

The external dimensions of this worktable are 2,3 m, while the usable work surface, the internal dimension, is 10 cm shorter. Dry goods such as screws, assembly parts and other articles can be stored here without any problems.

Alternatively, we also offer our worktables for storage racks with practical sloping shelves, robust multiplex panels, 25 mm thick wooden shelves or galvanised grid shelves.

A blue-painted worktable upright consists of a front and a rear upright profile. These are connected and stabilised by screwed horizontal and diagonal braces. The supplied covers close off the top of the upright and provide the necessary workplace safety.

All assembly material, such as screws and nuts, is already included in the delivery.