Hydraulic jack for truck WH50, 50.000 kg, TecMaschin
- High traction weight of up to 50.000 kg, allowing even trucks to be lifted
- Compact dimensions of 285 mm x 540 mm x 1.200 mm for simple transport
- High manoeuvrability of the 55 kg-heavy hydraulic jack for truck, thanks to its castors
- Intuitive operation thanks to the lifting equipment's clear and simple design
- Fast working, thanks to the lifting speed of 11 mm/s
- High traction weight of up to 50.000 kg, allowing even trucks to be lifted
- Compact dimensions of 285 mm x 540 mm x 1.200 mm for simple transport
- High manoeuvrability of the 55 kg-heavy hydraulic jack for truck, thanks to its castors
- Intuitive operation thanks to the lifting equipment's clear and simple design
- Fast working, thanks to the lifting speed of 11 mm/s
-
ModelWH50
-
ColorBlue
-
Load capacity50,000 kg
-
Lifting height420 mm
-
Weight55 kg
-
Width285 mm
-
Depth540 mm
-
Height1,200 mm
-
Outer diameter9 mm
-
TiresSolid rubber
-
SurfacePainted
- 1 x Hydraulic jack for truck WH50, TecMaschin, 50.000 kg
- 12 Months warranty
Powerful lifting
The hydraulic jack for heavy goods vehicles WH50 from TecMaschin effortlessly lifts vehicles such as passenger cars, vans and even trucks with a traction weight of up to 50.000 kg. The compact device (285 mm x 540 mm x 1.200 mm) is very easy to operate. Its low weight of 55 kg and fold-down drawbar allow for convenient transport and flexible positioning directly beneath the lifting point of various vehicles. The 180 mm large transport rollers also help with this, easily overcoming minor obstacles such as edges and kerbs. The 9 mm-wide connection for the air compressor is positioned directly beside the ergonomically placed control lever. The compressor must provide a minimum output of 8 bar. Once the compressor is connected and switched on, the lifting cylinder can be raised via the control lever at a speed of 11 mm/s to a height of up to 420 mm. The two support blocks can be placed on the jack cylinder as needed. Once work beneath the vehicle has been completed, the hydraulic jack for truck can be lowered again with 17 mm/s.
-
ModelWH50
-
ColorBlue
-
Load capacity50,000 kg
-
Lifting height420 mm
-
Weight55 kg
-
Width285 mm
-
Depth540 mm
-
Height1,200 mm
-
Outer diameter9 mm
-
TiresSolid rubber
-
SurfacePainted
- 1 x hydraulic jack for truck WH50, TecMaschin, 50.000 kg
- 12 Months warranty
At this time, SolidHub does not offer equipment with initial lift - a feature that raises the truck's wheel arms to provide additional ground clearance during load pickup and transport. However, we do have models in our line that have free lift. This feature allows the forks or load to be lifted without changing the overall height of the lift mast. An example of this is our HEF16/5 product.
To safely unload your new SolidHub stacker from the pallet, drive it off the pallet with the forks first. This will prevent damage to property or personal injury.
Our tip: Place the pallet in front of a kerb, as its height often corresponds to the height of a pallet. This allows you to drive your lifting device off the pallet almost at ground level.
Here you will find all the information you need to read a load chart.
Your order will usually be handed over to the shipping company within 24 hours of receipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
Is your question about this product not listed and still unanswered? Submit your question and our customer service team will respond promptly! We will review your submission and reserve the right to publish it.
General questions regarding service, orders or availability are answered exclusively via the contact form, chat or email.