Post-hole digger EBM540 incl. earth auger for tractor, drilling diameter 300 mm, drilling depth 600 mm
- The practical post-hole digger EBM540 can be mounted on tractors with a category 1 three-point hitch
- Its low dead weight enables easy assembly of the hydraulic attachment
- The matching PTO shaft is included
- A slip clutch protects the motor and gearbox from damage if the auger becomes stuck
- The practical post-hole digger EBM540 can be mounted on tractors with a category 1 three-point hitch
- Its low dead weight enables easy assembly of the hydraulic attachment
- The matching PTO shaft is included
- A slip clutch protects the motor and gearbox from damage if the auger becomes stuck
-
ModelEBM540
-
ColorBlue
-
MaterialsSteel
-
Weight89 kg
-
Width750 mm
-
Depth1,800 mm
-
Height1,800 mm
-
Outer diameter300 mm
-
Rotational speed540 rpm
-
SurfacePainted
-
Length1,200 m
- 1 x Post-hole digger, category 1 attachment, EBM540
- 1 x PTO shaft
- 1 x earth auger, diameter 300 mm, drilling depth 600 mm
- 12 Months warranty
Sink posts without effort
This is possible with our post-hole auger EBM540. With a rotational speed of 540 rpm, the power take-off enables the earth auger to bore through even the hardest and driest soil. The earth auger consists of two right-turning augers fitted with replaceable, hardened cutting edges at the tip. To enable smooth drilling into the soil, this auger is also equipped with a replaceable point.
The low dead weight of 89 kg and the compact dimensions of 750 mm x 1.800 mm x 1.800 mm for the complete assembly make it easy to mount the post-hole digger on a Category 1 three-point hitch. The 1290 mm long power take-off shaft hangs below the linkage. The post-hole digger is equipped with both a slip clutch and a shear bolt. These protective devices prevent engine or transmission damage if the earth auger becomes stuck in excessively hard ground.
The tractor transmission power to which the post-hole digger, including the power take-off shaft and earth auger, is attached should be between 25 and 50 hp.
The auger to match the post-hole auger
The solid yet efficient earth auger EB300 enables holes to be bored in soft to hard ground. Its drilling diameter is 300 mm, with a maximum drilling depth of 600 mm. This is possible thanks to the total auger length of 1.200 m and the hardened, replaceable auger attachments. Both the tip and the cutting edges, which are attached directly at the start of the auger, are made of hardened steel and are therefore ideally suited to penetrating harder ground. The low weight of 21 kg makes the earth auger easy to handle and convenient to install on the post-hole digger.
The right tool makes all the difference. Choose the post-hole digger EBM540 including earth auger EB300 now.
Please find out about the national regulations applicable in the country of use before commissioning. The person commissioning the equipment is responsible for commissioning it and for ensuring that suitable personnel are available for its use.
-
ModelEBM540
-
ColorBlue
-
MaterialsSteel
-
Weight89 kg
-
Width750 mm
-
Depth1,800 mm
-
Height1,800 mm
-
Outer diameter300 mm
-
Rotational speed540 rpm
-
SurfacePainted
-
Length1,200 m
- 1 x post hole digger, Cat 1 suspension, EBM540
- 1 x PTO shaft
- 1 x earth auger diameter 300 mm, drilling depth 600 mm
- 12 Months warranty
Your order will usually be handed over to the shipping company within 24 hours of receipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
Is your question about this product not listed and still unanswered? Submit your question and our customer service team will respond promptly! We will review your submission and reserve the right to publish it.
General questions regarding service, orders or availability are answered exclusively via the contact form, chat or email.