Forklift snow plough SSG1500, 1.500 mm width, SolidHub

Fixed in place, quick to clear

That is no problem with the robust forklift truck snow plough made of Steel. Weighing just 70 kg and with compact dimensions of (1.500 mm x 1.070 mm x 480 mm), the snow plough can be mounted on a forklift quickly. Thanks to the working width of 1.500 mm and the snow plough attachment, which can be adjusted to 5 angles, you can clear driveways, courtyards and larger open areas in no time. The flexible rubber strip on the underside of the forklift snow plough attachment seals the area down to the ground, ensuring thorough, residue-free clearing.

The practical support allows the forklift snow plough to be aligned so that the 130 x 55 mm-large forklift pockets are horizontal. You can simply drive into them, tighten the securing screws and lift the snow plough. Since the pockets are only 300 mm apart, the forklift forks must be adjusted for this purpose. The forklift should also be capable of pushing a traction weight of 2 t.

Once the snow plough is firmly mounted and the angle has been set, you can begin clearing the area. Turn your forklift into a clearing vehicle with the practical forklift snow plough from SolidHub.

Note:

Please note that using the attachment shifts the load centre of your stacker truck. For more information, refer to the load chart and load centre of your forklift truck for details.
The attachment is not suitable for high-lift pallet trucks; it is designed for forklifts. Before purchasing, please check whether the attachment is compatible with your forklift (fork tine cross-section up to max. 130 mm x 55 mm).

Please find out about the national regulations applicable in the country of use before commissioning. The person commissioning the equipment is responsible for commissioning it and for ensuring that suitable personnel are available for its use.